Winter Water Heater Care

Most homeowners enjoy obtaining new approaches to help cut down heating expenses in the cold months.  Ones water heater performs a great deal more through this time, so here are a number of ideas on how to conserve on energy expenses.

One easy method to check if ones water heater’s is requiring more insulation: place ones hand near or on the exterior of the water heater’s storage tank. If it feels  warm, insulating the tank is suggested. This loss of heat in the winter months adds up in time.  Then,  in the summer season, it may possibly add heat to the space that one will want to try to keep cool if the water heater is based on the inside of the property and not in a garage. Any heat that is noticed is undoubtedly heat getting sacrificed. If it is not warm at all that is a great indicator that the tank’s internal insulation is in respectable condition. New water heaters are being produced with a great amount of internal insulation today. The R-value can be found on the producer’s label so one can see exactly what the number is. If it R-24 or greater, one will most likely not need to add an insulation blanket on the water heater.

Water Heater BlanketsWater Heater Blankets Spring Texas

A water heater blanket or wrap helps reduce most of this heat loss. Various local energy companies, for provide insulation kits at minimized costs for homeowners. Hot water heater covers can be found in various sizes depending upon the gallon size of the storage tank. The higher the R-value, the greater the insulation power is. It is recommended making use of one that is at the very least an R-11.

It will be simple to put on the water heater cover. They will come with insulation tape to finish the seams of the blanket. Just make sure the shinny or vinyl side should go on the exterior.

For gas water heaters, wrap it around, without covering the top flue, and do not wrap over the controller at the bottom. Also, do not wrap the T&P valve handle, or the underside of tank for this will block air from going into the tank.  With electric water heaters, since there is no exhaust flue on the top, it can be covered, however do not cover the heating-element access panels.

These water heater blankets will certainly last quite a long period of time.  It can be reused whenever the water heater is updated, as long as it’s the exact same size to match the storage tank.

Water Heater Pipe Insulation

2 different types of pipe insulations are necessary for a water heater. For pipes found within 6 inches of the water heater exhaust flue, fiberglass insulation wrap ought to be made use of and needs to be connected with either high temperature aluminum tape or wire. Pipes beyond six inches can be wrapped in foam insulation sleeves.

The United States Department of Energy advises that homeowners insulate at least 6 feet of the pipe entering and out of the hot water heater. This can improve the temperature level at the faucets 2 to 4 degrees and help save money on heating. We also suggest wrapping both the hot and cold water pipes too.

Energy Savings from Water Heater Insulation

Insulating an inefficient hot water heater can certainly help trim the expense of running that heater by 5 % to 10 %. Depending upon the model, that can conserve anywhere from $5 to $20 each year, which means a water heater blanket can be paid for in 1 to 4 years. Adding insulation may well cut down standby heat losses by 25 % – 45 % and preserve around 4 % – 9 % in water heating expenses.

For more Water Heater Repair Spring TX tips, check us out here.

Winter Water Heater Care